What fits on the ST25TN01K
The CHYPS business card uses an ST25TN01K, an NFC Forum Type 2 tag. The NDEF area is 160 bytes by default. If you are not using the extra chip features, it can be grown to 198 bytes.
I wrote a single URI, https://chyps.com.ar/, as a test. NFC Tools reported 18 bytes, well inside the budget. The notes below are about what the tag can hold, not about what the first batch went out with.
Antenna
The coil was generated with a fork of Kicad-NFC-Coil-Generator by Tanguy Dietrich.
The coil follows the credit-card outline: 79.6 x 48.0 mm, 4 turns, 0.55 mm traces, 0.50 mm spacing.
The ST25TN01K has an internal tuning capacitance of 50 pF typical. There is no external cap. At 13.56 MHz that points at about 2.76 uH. The calculated inductance of this coil is 2.65 uH, not a measurement.
What you can write
- A URL, including a UTM campaign if you want one.
- A short vCard. A full contact with many fields probably will not fit in 160 bytes, once NDEF headers are counted.
mailto:,tel:, or a WhatsAppwa.melink. These are small URI records, same as the site URL.
The ST25TN01K can permanently write-lock user blocks. That is irreversible. You can also leave the tag rewritable and change the record later.
Kill mode is a different feature: it permanently mutes the RF interface. It is not a write lock. The chip also has TruST25 (a digital signature) and Augmented NDEF, which can insert the UID or a unique tap code into the NDEF message without rewriting EEPROM.
A later batch
I looked at energy harvesting from the reader field, enough to light an LED or similar when the card is scanned. The ST25TN01K does not have a harvest output. Its only pins are the antenna connections. The “power harvesting” in the datasheet is how the IC itself is powered from the 13.56 MHz field.
Parts that do expose a pin for this include the ST25DV-I2C family and NXP’s NTAG I2C plus. That is a candidate for a future batch, not this one.
I posted a short video of a phone reading the card: https://x.com/aleheir/status/2097631770426413382.